Little Step by Step

Setup Guide:

1. Turn on the device, the red LED should light up for a few seconds. The device turns on and lights up
2. Push and hold the record button below the LED for about 2-3 seconds, the LED should light up solid red, let go of the recording button.
3. Select the desired level.
4. Press the switch top and you should hear a beep, and the LED should be flashing. Speak your message.
5. Once finish speaking a message, let go of the switch top and you should hear a beep and the LED should be solid red.
6. Repeat steps 4 and 5 for an additional message.
7. Press the record button below the LED once to turn off the record mode, the red LED should turn off as well.
8. Press the switch top to listen to your message, and LED should light up red while your message is playing.